How Much Does Asphalt Sealcoating Cost in Colorado Springs, CO? (2026 Guide)
These are observed market ranges for asphalt sealing and repair around Colorado Springs, drawn from national cost guides and one local contractor's posted prices. They are not quotes. The spread is wide: Angi's state table puts a typical Colorado driveway sealing job at $880 to $1,690, averaging $1,280, against a national average of $575, while a Colorado Springs contractor lists $250 to $600 for a typical drive. Size, slope, the amount of crack work and access explain most of that gap, and a bid that does not say which of them it includes is hard to compare.
| Service | Typical Colorado Springs Range |
|---|---|
| Two-car driveway, about 400 sq ft, cleaned and sealed | $250 - $800 |
| Long, three-car or hillside driveway, cleaned and sealed | $500 - $1,700 |
| Residential sealing priced by area | $1.00 - $2.00 per sq ft |
| Hot-pour crack filling | $1.00 - $3.00 per linear ft |
| Pothole or small patch, per repair | $100 - $500 |
| Saw-cut, full-depth patching | $4 - $12 per sq ft |
| Parking lot sealcoating | $0.15 - $0.30 per sq ft |
| Parking lot striping | $5 - $20 per stall |
| New or replacement asphalt driveway | $5 - $15 per sq ft |
Free quote
What Changes the Price?
Slope and access. A hillside drive near the city's 20 percent limit is slower to clean, fill and coat by hand than a flat pad, and sand-loaded sealer for grip adds material. Tight turnarounds, retaining walls and long approaches up from the street add labor without adding much area.
Repairs ahead of the coat. Crack filling runs about $1 to $3 per linear foot, and heaved or broken sections call for saw-cut patching at $4 to $12 per square foot. On clay loams that swell when wet, the repair lines can outweigh the sealing line on an older drive.
The calendar. The airport's normals put dependable warm nights mostly in July and August, and those weeks fill first. A job booked into late May or September may wait on a warm stretch, and every rain delay in the wettest months pushes the whole schedule back a day.
Product and coats. HomeGuide lists material alone at about $0.06 to $0.15 per square foot for coal tar or asphalt emulsion and $0.20 to $0.25 for latex acrylic, and a second coat roughly doubles the material. Ask whether a price includes two coats, sand and oil-spot primer.
Two checks help when comparing bids here. First, confirm whether crack filling is in the price or billed by the foot, since that line moves totals the most on an older drive. Second, ask how many coats are included, whether sand is mixed in, and what the crew will do if the night after application is forecast below 50 degrees. For the climate that sets the calendar, see the pavement climate data, and for heave repairs, the asphalt patching page.
How these ranges were built
HomeGuide sizes a two-car driveway at 20 by 20 feet, or 400 square feet, and a three-car at 24 by 36 feet, or 864 square feet; the two driveway rows use those sizes, blended with a Colorado Springs contractor's public sealcoating page, which lists $250 to $600 for a typical drive and $500 to $900 for a long one. Angi's Colorado table, $880 to $1,690, sits inside the second row. Crack filling and patching come from HomeGuide's and Angi's repair guides, lot sealing from HomeAdvisor's parking lot guide and one lot contractor's published pricing, striping from Angi's 2026 guide, and new driveways from HomeGuide and Angi.
Why small jobs cost more per foot
Setup does not shrink with the job. HomeGuide notes a minimum service fee of $100 to $250 on asphalt repair work, and Angi prices a 250-square-foot sealing job at about $290 or a contractor's minimum flat rate. Loading equipment, heating a crack kettle and cleaning up take the same time on a short drive as on a long one, so combining sealing with crack filling, or joining a neighbor's job, spreads that fixed cost.
Asphalt Sealcoating Pricing Questions
Why do Colorado prices on Angi run so far above the national figure?
Angi does not break down the reasons, so the comparison works as a signal rather than an explanation. Its tables show Colorado at $880 to $1,690 for sealing, against $125 to $900 for Ohio and $150 to $1,600 for Missouri, and a national average of $575. Locally posted prices sit lower, at $250 to $600 for a typical drive. Measuring the driveway and getting two itemized bids settles more than any average.
Does fill-and-seal cost more than regular sealer?
Per square foot of material, yes. HomeAdvisor lists fill-and-seal products at $0.35 to $0.50 per square foot against $0.08 to $0.10 for standard emulsion sealer. The labor is similar, so the difference shows up mostly in material. Neither product replaces hot-pour filling for cracks wider than a hairline, and on a Colorado Springs drive with active heave neither will hold for long.
Get Exact Colorado Springs Pricing
Free quote